Alphagage+
Home / Products / Sonatest / Thickness Gauges / Alphagage+
Categories

Overview

AlphaGage+ Corrosion (C )

Uses dual element transducers to measure remaining wall thickness on primarily steel structures subject to corrosion.

  • Compatible with a wide variety of dual element and a limited number of single element transducers
  • Wide thickness range (.020” to 23” depending on gage type, material and transducer)
  • Echo-to-echo readings to ignore coatings
  • High temperature probes available up to 950F/509C (intermittent use)
  • Temperature correction
  • Gridview
  • Password lock
  • Supervisor and other locks
  • 2,700 stored setups
  • Change color and vibrate on alarm

AlphaGage+ Precision (P)

Allows for the use of single element transducers along with up to 2,700 stored application setups with 1 micron resolution.

  • 0.006-23” range in steel
  • 1 micron resolution (0.0001” or 0.001 mm)
  • Single element, contact, delay line and immersion transducers (1-30 MHz)
  • Supervisor and other locks
  • 30 Mhz bandwidth
  • Zoom Auto Tracking
  • Multiple modes for challenging applications
  • Square wave Pulser
  • Auto Phase Reversal Detection with alarm

Features

Standard Features

  • Echo-to-Echo “Through Coatings” functionality (Corrosion Models Only)
  • Up to 27 Hour battery life (high-capacity re-chargeable battery pack via the USB port)
  • Change color and vibrate on alarm (ideal for inspections in loud environments)
  • Wide thickness range
  • Inches, mm or μSec
  • Velocity mode
  • Fast Min/Max mode to display actual thickness and minimum and maximum at the same time
  • Multiple languages
  • Available Live Waveform with gain, range, rectification, blank adjustments (with W Upgrade only)
  • 2 GB micro SD card standard, expandable to 32 GB
  • Available Datalogger interfaces with Microsoft Excel (With DL Upgrade only)
  • Designed for IP67
  • Simple one hand operation
  • Field upgradeable software options

Accessories

Standard Model

Included with the unit
Transducer
– Corrosion Gage includes a DKS537, dual element 5.0 MHz, 0.375” probe with potted 3 foot cable
– Precision Gage includes a 2.25 – 10 MHz single element probe with a Lemo to microdot cable
2 GB micro-SD card (minimum)
Li-ion battery w/ battery charger
Couplant
Transport Case
Manual with Data XL
USB cable
Custom Rubber Boot (DLW Models Only)
Calibration Certificate

Specification

Measurement Rate 4Hz or 25Hz
Bandwidth 0.5 MHz to 30 MHz (-3dB)
Connector Type Lemo 00 (x2)
Size 7.25″ x 4.00″ x 2.00″
Weight 1.2LB w/ Li-ion Battery
Display 3.5” high resolution color TFT display, 320 x 240 pixels
Backlight Management LED backlight, includes variable light intensity.
Operating Temperature -4 to 122°F
Certifications CE certified, RHOS complaint and designed for IP67
Warranty Limited 2 year warranty under normal use on parts and labor
246