The MVX finishes the line of MX gauges with class. This thing is loaded with all of the features of the MX gauges and a lot more. Four selectable display options: RF, Rectified, B-Scan, and Large Digits. An internal data logger that stores a total of 12,000 readings and waveforms, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find – just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability and portability! Our DakView java-based PC or MAC OSX software makes this thing a complete kit, and then some!

MVX

 

APPLICATIONS

Corrosive & Pitting Boilers
Tube & Pipe Glass
Tanks Variety of Applications
specifications
Physical Weight: 13.5 ounces (with batteries).
Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
Operating Temperature: -14° to 140°F (-10° to 60°C).
Keyboard: Membrane switch with twelve tactile keys.
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).
Power Source Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if idle 5 min.
Battery status icon.
Transducer Transducer Types: Dual Element (1 to 10 MHz).
Locking quick disconnect “00” LEMO connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications.
Display Display Views: A-Scan Rectified +/- (flaw view) RF (full waveform view)
B-Scan Cross sectional view.
Display speed of 15 secs per screen.
Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar Graph Bar graph indicates stability of reading.
Data Logger(Internal) 12,000 pages of memory (alpha numeric storage).
Page contents: 1 reading and 1 waveform per page.
OBSTRUCT to indicate inaccessible locations.
Memory: 16 megabit non-volatile ram.
Certification Factory calibration: traceable to national standards
Warranty 2 year limited
Ultrasonic Specifications Measurement Modes: Pulse-Echo (flaws, pits)
Echo-Echo (thru-paint)
Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
Timing: 20 MHz with ultra low power
8 bit digitizer.
Measuring Range: Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).
Echo-Echo Mode: Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102 millimeters).
Range will vary +/- depending on the thickness of coating.
Resolution: +/- .001 inches (0.01 mm)
Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
Features Setups: 64 custom user-definable setups.
Factory setups can also be edited by the user.
Gates: Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.
Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
Flaw Mode: Basic Prove-up flaw detection option using single element angle beam transducers.