Digital Rockwell Hardness Tester NOVOTEST TB-R-C
Home / Products / Novotest / Hardness Testing Equipment / Bench hardness testers / Digital Rockwell Hardness Tester NOVOTEST TB-R-C
Categories

DIGITAL ROCKWELL HARDNESS TESTER NOVOTEST TB-R-C

Digital Rockwell hardness tester TB-R-C implements direct Rockwell method of hardness testing in accordance with ISO 6508-2 and ASTM E18.

Application

Rockwell Hardness Tester NOVOTEST TB-R-C allows user to measure hardness of:

  • hardened and surface hardened steel, hardened and tempered steel;
  • cold and hard casted parts, forged parts;
  • hard alloy steel;
  • aluminium alloys;
  • bearing steel;
  • carbonized steel sheets and others.

Description

Digital Rockwell Hardness Tester NOVOTEST TB-R-C is a digital model with new-designed large LCD screen to display the structure of menu. The bench Rockwell hardness tester has the hyper terminal setting RS-232 with good reliability, excellent operation and easy watching.

The Rockwell hardness test uses the method of measuring indentation depth. The hardness values are read directly through the LCD screen. Therefore, it is easy to operate the hardness tester with high efficiency. The hardness tester is suitable for inspect batches of spare parts. Digital Rockwell Hardness Tester NOVOTEST TB-R-C allows to use the diamond indenter and ball indenter, which can measure the hard and the soft samples. So, it has been widely used in production to become the most detecting device for inspecting the product quality and determining the reasonable processing technology.

Advantages:

Digital model has following advantages against analog machine:

  • more convenient in operating;
  • measurement process is faster;
  • setting menu is easy in use (setting of scales, loads and dwell time etc.);
  • digital resolution is better. As a result, accuracy is higher than manual tester has;
  • RS-232 interface;
  • human factor influence is minimum.

The machine allows user to:

  • select the Rockwell hardness scales type (A, B, C, D, E, F, G, H, K);
  • recalculate the obtained hardness values into all hardness scales (Brinell, Rockwell and Vickers);
  • record test results under the particular operator;
  • print the results of hardness measurements via built-in printer;
  • automated load/unload system allows user to get measurement results of high accuracy and free of operator faults.
specifications
Indenter Conical Rockwell diamond indenter (120 °): diamond tip as a cone with 120 degrees of the cone apex angle and the bead size of 1/16 inch (1.5875 mm)
Scales 20-88 HRA
20-100 HRB
20-70 HRC
40-77 HRD
70-100 HRE
30-94 HRG
80-100 HRH
40-100 HRK
Hardness resolution value 0.1
Measurement accuracy <1.0%
Conversion scales Plastic Rockwell, Brinell, Vickers
Initial testing load(accuracy ±2%) 98.07N (10kg)
Testing load (accuracy ±1%) 588.4N (60kg)
980.7N (100kg)
1471N (150kg)
Measuring time 5~60 sec
Testing materials Cemented carbides, thin steel and shallow case hardened steel
Steel, hard cast irons, pearltic malleable iron, titanium, deep case hardened steel & other material harder than HRB 100
Thin steel and medium case hardened steel and pearlitic malleable iron
Hardened and surface hardened steel, hardened and tempered steel; cold and hard casted parts, forged parts; hard alloy steel; aluminum alloys; bearing steel; carbonized steel sheets and others
Max height of test sample 100 mm (210 mm – without protective cover)
(can be produced up to 400 mm)
Max depth of test sample 165 mm
Power supply 220V±5%, 50~60Hz
Data output LCD
Built-in printer
RS-232 interface
Recommended operating conditions Air temperature: 0…+40 °С
Air pressure: 94 – 106.7 kPa
Humidity: up to 65%
Net weight 86 kg
Gross weight 96 kg
Package dimensions 630*500*860 mm (L*W*H)
229