Inspection System SONOAIR
Home / Products / Sonotec Ultrasonic Solutions / Inspection System SONOAIR
Categories
INSPECTION SYSTEM SONOAIR

Advantages

  • Air-coupled, contactless, couplant free
  • Inspection of highly attenuating materials
  • High resolution due to the use of focusing transducers

 

Applications

  • Interface detection
  • Bond inspection and homogeneity analysis
  • Delamination testing etc.

Already during the material development of modern composite materials such as glass or carbon fiber reinforced plastics (GFRP, CFRP) and ceramics it is necessary to detect internal structures and discontinuities fast and reliably.

Research institutes, industrial development laboratories and quality assurance departments of production facilities highly appreciate a contactless, high resolution inspection. The performance of the transmitter receiver system is very important to penetrate these highly attenuating materials. The ultrasonic transducers, the scanning area and the software can be adapted to the specific geometry and material composition of the test object.

These high requirements can be fulfilled with the new and modular SONOAIR inspection system for laboratory and quality assurance applications.

Materials, Compounds & Structures

  • Carbon fiber reinforced plastics (CFRP)
  • Glass fiber reinforced plastics (GFRP)
  • Wood, cellulose and natural fibers
  • Plastics
  • Thin metals sheets
  • Adhesive bonds
  • Honeycomb structures
  • Foams and foam compounds
  • Natural fiber mats, structural composites of lumber and adhesives as well as chipboard sheets

Technical Data

General Data
19” unit consisting of PC with Windows 8.1 and system software SONOSTUDIO; Digitizer 16 Bit, 100 MS/s; Transmitter unit; Receiver unit
Operating temperature 5 to 40°C
Network interface 1 GBit/s LAN
Protection class IP20
Standards DIN EN 601010, DIN EN 60204
Transmitter
Number of channels Up to 4
Pulse height of the output signals Up to 400 V (optional up to 800 V)
Frequency range 35 to 750 kHz
Maximum power 2 kW (400 V), 4 kW (800 V)
CW operation Possible
Square wave burst transmitter Freely configurable (the pulse width can be selected individually for every square wave pulse of the burst)
Receiver
Number of channels Up to 4
Frequency range 25 to 650 kHz (optional up to 3 MHz)
Gain 0 to 120 dB (0.5 dB increment)
Noise 1nV/√Hz
Scanner
Scanning area (X x Y x Z) 500 x 500 x 160 mm
Positioning accuracy 20 μm
Scanning increment Minimum 50 μm
Probes SONOSCAN CF series with robust stainless steel housing
Frequency Range 50 kHz to 400 kHz
Relative sensitivity Up to -30 dB
Resolution Up to 2 mm
Focusing Permanent focus with shaped lens or electronically adaptable focus with multi channel Fresnel zone design

Extensive Software Library SONOSTUDIO

  • Display of the measurement results as A-, B-, C- or D-Scan
  • Storage of the complete A-scans for every measurement point during the testing process
  • Repositioning of the measurement gates after the inspection
  • Individual signal processing algorithms (e.g. for filters)

Video:

86