X3 (Sectorial & Linear Scan)
Home / Products / Sonatest / Phased Array Transducers / X-Series / X3 (Sectorial & Linear Scan)
Categories

Universal Use Transducer

Features

  • Quick I-PEX Connector (QX)
  • Quick I-Pex Bracket
  • 2.5m Cable (other cable lengths upon request)
  • Armoured Cable on request
  • Hard Faced Option on request

Common applications:

  • General critical welds (Butt, T joints and Corner joints)
  • Castings
  • Flanges
  • Automotive parts
  • Machined parts

Specification

X3 Transducers

Product Code Transducer Description Frequency Number of Elements Elevation Element Pitch Aperture External Dimensions
F (MHz) Qty E (mm) P (mm) L (mm) Length (mm) Width (mm) Height (mm)
X3A-001 X3A-2.25M48E-0.8×10-SQX2.5 2.25 48 10 0.8 38.4 45 23 20
X3A-002 X3A-3.5M64E-0.6×10-SQX2.5 3.5 64 10 0.6 38.4 45 23 20
X3A-003 X3A-5M64E-0.6×10-SQX2.5 5 64 10 0.6 38.4 45 23 20
X3A-004 X3A-10M64E-0.6×7-SQX2.5 10 64 7 0.6 38.4 45 23 20

X3 Wedges

Wedge Materials

NOTE: all wedge dimensions listed below are made with Rexolite, high temperature materials will require consultation on the most suitable wedge and probe solution for your inspection requirements, below are listed common materials used in our wedges

Material Max Service Temp (ºC) Max Service Temp (ºF) Compression Velocity at 5MHz (mm/µs) Wedge Types (Angled / Flat)
Rexolite 60 140 2.33 Both
Torlon 260 500 2.71 Both
Vespel 300 572 2.51 Flat

Wedge List

Product Code Wedge Description Wave Type Nominal Refracted Angle in Steel Recommended Sweep (in steel) Delay Line Length Wedge Dimensions
LW/SW (º) Min (º) Max (º) (mm) Cut Angle (º) Length (mm) Width (mm) IHC Width (mm) Front Height H1 (mm) Back Height H2 (mm)
X3AW-001 X3AW-0L25 L 0 -20 20 25 0 65 25 N/A 25 25
X3AW-002 X3AW-N45S S 45 35 60 0 31 65 25 N/A 41 16.7
X3AW-003 X3AW-N55S S 55 40 70 0 36 65 25 N/A 38.6 11.7
X3AW-004 X3AW-N60S S 60 45 75 0 39 65 25 N/A 36.3 7.5
X3AW-005 X3AW-N45L L 45 35 65 0 16 65 25 N/A 34.4 21
X3AW-006 X3AW-N60L L 60 30 75 0 20 65 25 N/A 43 25
X3AW-007 X3AW-0L25-IHC L 0 -20 20 25 0 65 N/A 42 25 25
X3AW-008 X3AW-N45S-IHC S 45 35 60 0 31 65 N/A 38 41 16.7
X3AW-009 X3AW-N55S-IHC S 55 40 70 0 36 65 N/A 38 38.6 11.7
X3AW-010 X3AW-N60S-IHC S 60 45 75 0 39 65 N/A 38 36.3 7.5
X3AW-011 X3AW-N45L-IHC L 45 35 65 0 16 65 N/A 38 34.4 21
X3AW-012 X3AW-N60L-IHC L 60 30 75 0 20 65 N/A 38 43 25

X3 Glider Wedge

Product Code Wedge Description Wave Type Nominal Refracted Angle in Steel Recommended Sweep (in steel) Delay Line Length Wedge Dimensions
LW/SW (º) Min (º) Max (º) (mm) Cut Angle (º) Length (mm) Width (mm) IHC Width (mm) Front Height H1 (mm) Back Height H2 (mm)
X3AG-001 X3AG-0L25 L 0 -20 20 25 0

 

260