- Home
- About Us
- Products
- Rohmann Eddy Current
- Secu-Chek UV-LED Lamps
- Sonatest
- MR Chemie
- Hoffmann Tam Panels
- Desoutter Industrial Tools
- Novotest
- Integrated Design Tools (IDT Vision)
- Dakota NDT
- DeFelsko Corporation
- Sonotec Ultrasonic Solutions
- Sonotec Ultrasonic Hand-Tools
- G.A.L. Gage Company
- Western Instruments Inc.
- Esders Gas Technology
- Hinode Electric
- News
- Contact Us
 (65) 6878 0608  (65) 6878 0609 |
|
X5 (Deep Penetration)
|
Deep Penetration Inspection
Features
- Quick I-PEX Connector (QX)
- Quick I-Pex Bracket
- 2.5m Cable (other cable lengths upon request)
- Armoured Cable on request
- Hard Faced Option on request
Common applications:
- Structural component (large pins)
- Shaft inspection
- Casting, bars & billets
- Critical large weld inspection
Specification
X5 Transducers
| Product Code | Transducer Description | Frequency | Number of Elements | Elevation | Element Pitch | Aperture | External Dimensions | ||
|---|---|---|---|---|---|---|---|---|---|
| F (MHz) | Qty | E (mm) | P (mm) | L (mm) | Length (mm) | Width (mm) | Height (mm) | ||
| X5A-001 | X5A-2.25M16E-1×16-SQX2.5 | 2.25 | 16 | 16 | 1 | 16 | 23 | 45 | 20 |
| X5A-002 | X5A-5M16E-1×16-SQX2.5 | 5 | 16 | 16 | 1 | 16 | 23 | 45 | 20 |
| X5A-003 | X5A-2.25M16EHF-1×16-SQX2.5 | 2.25 | 16 (Hard-Face) | 16 | 1 | 16 | 23 | 45 | 20 |
| X5A-004 | X5A-5M16EHF-1×16-SQX2.5 | 5 | 16 (Hard-Face) | 16 | 1 | 16 | 23 | 45 | 20 |
X5 Wedges
Wedge Materials
NOTE: all wedge dimensions listed below are made with Rexolite, high temperature materials will require consultation on the most suitable wedge and probe solution for your inspection requirements, below are listed common materials used in our wedges
| Material | Max Service Temp (ºC) | Max Service Temp (ºF) | Compression Velocity at 5MHz (mm/µs) | Wedge Types (Angled / Flat) |
|---|---|---|---|---|
| Rexolite | 60 | 140 | 2.33 | Both |
| Torlon | 260 | 500 | 2.71 | Both |
| Vespel | 300 | 572 | 2.51 | Flat |
Wedge List
| Product Code | Wedge Description | Wave Type | Nominal Refracted Angle in Steel | Recommended Sweep (in steel) | Delay Line Length | Wedge Dimensions | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LW/SW | (º) | Min (º) | Max (º) | (mm) | Cut Angle (º) | Length (mm) | Width (mm) | IHC Width (mm) | Front Height H1 (mm) | Back Height H2 (mm) | ||
| X5AW-001 | X5AW-0L40 | L | 0 | -20 | 20 | 40 | 0 | 38 | 38 | N/A | 40 | 40 |
| X5AW-002 | X5AW-N60S | S | 60 | 45 | 75 | 0 | 39 | 45 | 38 | N/A | 30.2 | 13.6 |
| X5AW-003 | X5AW-N60L | L | 60 | 30 | 75 | 0 | 20 | 45 | 38 | N/A | 33 | 21 |
| X5AW-004 | X5AW-0L40-IHC | L | 0 | -20 | 20 | 40 | 0 | 38 | N/A | 52 | 40 | 40 |
| X5AW-005 | X5AW-N60S-IHC | S | 60 | 45 | 75 | 0 | 39 | 45 | N/A | 49 | 30.2 | 13.6 |
| X5AW-006 | X5AW-N60L-IHC | L | 60 | 30 | 75 | 0 | 20 | |||||