Description

The GOLIATH is perfectly suited for use in troubleshooting service. In addition to the typical application of a reported odour of gas, a large proportion of uses are based on the statement ‘no gas present’. In such case, the fitter will have to determine the cause and has been informed about the pressure measurement in the gas installation. The GOLIATH is perfectly suited for this task as well, with its measurement range of 0 to 2,000 hPa (optional pressure sensor).

Measuring carbon monoxide concentrations in addition to monitoring flammable gases is a time-tested practice at many gas supply companies. For this reason, the ‘Building inspection’ application also indicates the CO concentration and triggers an alarm if it exceeds 10 ppm. This keeps the operator informed of potential problems with the exhaust gas routing.

Features

Time-tested Esders operation concept.
Very quick initial break-in phase after being switching on or changing application.
Extremely short reaction times when measuring CH₄ and CO₂ in all concentrations.
Oxygen and up to 3 toxic gas sensors are available as an option.
Ethane analysis with automatic measurement result assessment can be integrated.
Optional pressure measuring up to 2,000 hPa.

Picure_GOLIATH_Testgas

specifications
Display	LCD graphic display 128 x 64 pixels, illuminable
Power supply	NiMH rechargeable battery pack
Operating temperature	-10 °C to +40 °C
Operating time	Varies depending on application and illumination
Charging	Charging cradle supplied by 12 Volt DC or 230 Volt AC, Charging time approx. 3 hours USB port (specified for 500 mA), Charging time approx. 8 hours
Data Store	Flash memory 4 Mbyte for more than 1 Mio. measurement values
Protection type	IP54
Dimensions	200 x 100 x 87 mm
Weight	approx. 1.250 g
Explosion protection ATEX	BVS 09 ATEX E 079 X – Ex II 2G Ex ib d IIB T3/T4 Gb